Pure Gas Products

Multiple Gas Generators

English
Gas Generators
   

CLAIND Laborgasgeneratoren - Multiple Generator HANG

Hydrogen & Air & Nitrogen Genarator

Main Features
  • Built in compressor for air and nitrogen
  • Fast start feature to allow the maximum purity just few minutes after switching on
  • Stand by mode allows to produce the only gas quantity required
  • Compact instrument
  • Catalytic reactor for hydrocarbon removal
The HANG generator is a unique multiple generation system exclusive of Claind, which includes hydrogen, nitrogen and pure air supply all in one.
The generators are all autonomous and are equipped with microprocessor control system for monitoring the working status and alarm signalling.
The HC feature is available on the nitrogen side and the three generators are completely independent one from the other.
One of the main advantages of this system is the low space occupancy. In fact one hydrogen generator from the HG 2000 series (bench version) is mounted on top of the ANG generator to build up the HANG generator.

Working Principle
NITROGEN & PURE AIR
Both air and nitrogen are produced according to the PSA principle (Pressure Swing Adsorption).
Ambient air is purified from oxygen, moisture, CO and other ‘contaminants’ by passing through a Carbon Molecular Sieve filter (CMS).
By using different composition of CMS and by setting different operating parameters, purified air is obtained from one side and high pure nitrogen from the other side.
HC removal is done with a catalytic reactor (only nitrogen side).
HYDROGEN
Hydrogen is produced through a patented electrolytic cell, manufactured exclusively from Claind. Demineralized water is loaded into the electrolytic from a small water tank. The patented cell electrolysis the water producing hydrogen. Oxygen is than safely dissipated into the atmosphere.
Hydrogen flows through a stainless steel desiccant cartridge for moisture removal.
Purity
HANG 2xxxHANG 2xxx HC
Hydrogen purity*99,99999%99,99999%
Nitrogen purity99,9995%99,9995%
Moisture content AIR side< -60 °C dew point< -60 °C dew point
Total hydrocarbons residual**...< 0,1 ppm
* When used with additional purifier
** tested in Claind laboratories in standard conditions @ 25°C

HC feature (hydrocarbons removal):
HC removal efficiency:
> 99% methane (CH4)
> 99,5% aromatics (BTX) and hydrocarbons starting from C3Hn
> 99,9% carbon monoxide (CO), hydrogen (H2) ethylene and propylene.
Modelle & technische Spezifikationen
Model H2 Flow
Nml/min
N2 Flow
Nml/min
Air Flow
Nml/min
Power
VA
Weight
kg
HANG 2201200800300070092
HANG 2201 HC200800300080097
HANG 2401400800300077094
HANG 2401 HC400800300087099
HANG 2601600800300084096
HANG 2601 HC6008003000940101

Electrical supply: 230 Vac 50 Hz or 110 Vac 60Hz
Noise level: < 55 dB
Operating temperature: between 5°C and 40°C
Consumables: refer to the specific gas data sheet
Gas Characteristics:
H2 outlet pressure: 1-6 barg*
Air and N2 outlet pressure: 6 barg**
* Standard setting 4 barg, adjustable. 6 barg available on demand
** Standard setting 4 barg, 6 barg available on demand
Dimensions
HANG 2xxx
Height118 cm
Width40 cm
Depth58 cm

© 2025 Rainer Lammertz
DisclaimerImprintSitemap