300 Liter Hydrogen Storage

  • Backup hydrogen source in laboratory rooms
  • Designed to provide hydrogen for stationary instruments (GC, GC-MS, et al.)
  • Able to run over three units of GC instruments at the same time
HB-SCG-0300-N is a hydrogen storage system, based on the latest achievements in solid metal hydride technology of AB5-type alloys as well as on unique techniques of alloy loading. It allows to store and release the gas at ambient temperature and at designed pressure range from 1.0 up to 3 atm with very high stability of gas flow: 95% of stored gas can be released with designed maximum flow rate at almost constant temperature.
At present, this type of storage is considered as the safest one: gunshot tests with full hydrogen charged tank does not result in any combustible reaction, which clearly demonstrates the safety level of the product. Unlike the high-pressure hydrogen cylinders, here hydrogen is bonded with the alloy chemically. So, it will take hours before the system will release it fully in event of gas leakage caused by systems damage.
The system is able to pass a few thousand charge/discharge cycles without any essential changes in working technical characteristics, while exploited properly.
In addition HB-SCG-0300-Q is capable to provide high purity hydrogen (over 99.9999%) while charged with only 99.99% purity hydrogen. It makes HB-SCG-0300-Q an ideal pure hydrogen source for Gas Chromatography and for many other gas purity-sensitive systems.
Hydrogen Storage Capacity300 ± 5%Liter
Raw Hydrogen Purity≥ 99.99%
Hydrogen Charge Pressure2.5 - 3.5 ( 25C )MPa
Charge Environmental Temperature0 - 35 ( we recommend = 25C )C
Hydrogen Discharge Pressure> 0.1, ≤ 0.7 ( 25C )MPa
Hydrogen Discharge Purity≥ 99.9999%
Hydrogen Discharge Flow Rate≤ 0.5 ( 25C )L/min
Environmental Temperature5 - 60C
Heat Exchange MethodAir Convection / Water bath
Valve TypeSwagelok SS316 needle valve
( with 1/4 tube fitting )
Canister Dimension600.D280Lmm
Total Weight< 3.1kg

© 2024 Rainer Lammertz