10 Liter Hydrogen Storage

  • Especially designed for small size fuel cells, fuel cells in toys, etc.
With the latest achievements in solid metal hydride technology of AB5-type alloys and unique techniques of alloy loading the HB-SC-0010-Q is one the most advanced hydrogen storage system. The HB-SC-0010-Q can safely store hydrogen in the solid state and release it steadily at ambient temperature without additional energy source - an important issue for fuel cell application. The enhanced discharge gas flow rates of the HB-SC-0010-Q makes it a highly competitive gas supply source for various PEM fuel cells (up to 5 W).
At present, this type of storage is considered as safest one. Even gunshot tests with fully hydrogen charged tanks do not result in any combustible reaction, which clearly demonstrates the safety level of the product. Unlike the high-pressure hydrogen cylinders, here hydrogen is bonded with the alloy chemically. So, it will take hours, before the system will release it fully in event of gas leakage caused by systems damage.
The system life cycle is incredibly long our storage is able to pass few thousand charge/discharge cycles without any essential changes in working technical characteristics.
While charge with only 99,99% purity hydrogen the HB-SC-0010-Q is capable to provide high purity hydrogen (over 99.9999%). It makes HB-SC-0010-Q an ideal pure hydrogen source for Fuel Cell systems, that is in addition easy to use and very safe.
Hydrogen Storage Capacity10 ± 5%Liter
Raw Hydrogen Purity≥ 99.99%
Hydrogen Charge Pressure1.0 - 1.5 (10 - 25C)MPa
Charge Environmental Temperature0 - 35C ( we recommend = 25C )C
Hydrogen Discharge Pressure> 0.1, ≤ 0.5 ( 25C )MPa
Hydrogen Discharge Purity≥ 99.9999%
Hydrogen Discharge Flow Rate< 50ml/min
Environmental Temperature10 - 60C
Heat Exchange MethodAir Convection / Water bath
Valve TypeQuick connector SS304 2.5IDmm or 4.0IDmm
Plastic tube fitting(MISUMI, Japan)
Canister Dimension210.D100Lmm
Total Weight< 150g

© 2024 Rainer Lammertz