Carbon Dioxide Adsorbers - VCD-SERIES

The VCD-Series carbon dioxide adsorbers are designed to remove CO2from compressed air. The carbon dioxide adsorber does this by using media beds featuring 13X molecular sieve in a pressure swing adsorption process. Adsorbed moisture and CO2 are vented to atmosphere while dry CO2-free air is provided at the outlet port. Standard voltage is 115 VAC. 230 VAC is available. Standard operating pressures from 3,4 to 10 Bar.

VCD-SERIES CO2 ADSORBER SPECIFICATIONS Outlet Flow Capacities at Various Operating Pressures
Model	Outlet Flow (liters/minute)
Bar	3,4*	4,1*	4,8*	5,5*	6,2	6,9	7,6	8,3*	9,0	9,6	10
VCD3	5	9	13	15	19	23	25	30	33	35	38
VCD4	16	26	33	37	48	60	65	73	85	93	99
* factory selected purge orifice installed for these pressures - please state operating pressure with order

Model	VCD3	VCD4
Flows at 6,9 Bar (liters/minute)
Inlet Flow	40	95
Purge Flow	17	35
Outlet Flow	23	60
ALL MODELS
Power requirement: 115/1/50/60 or 220/1/50/60, 20 watts Maximum temperature 49°C ambient Maximum pressure 10 Bar Outlet CO2 concentration: less than 1 PPM Outlet H2O concentration less than 1 PPM (-73°C dew point)
RECOMMENDED FILTRATION ON INLET
Lubricated Compressor: 5.0 Micron filter and 0.01 Micron filter Non-lubricated Compressor: 5.0 Micron filter

Connections (NPT)
Inlet	1/4"	1/4"
Outlet	1/4"	1/4"
Dimensions (cm)
Height - "A"	41	61
Width	20	20
Depth	12	12
Weight (kg)	4,1	6,3

• Outlet CO₂ content to less than 1 PPM
• Outlet H2O content to less than ( -73°C dew point)
• Air dried to less than -73°C dew point
• Compact and lightweight design requires less space
• Solid state timer with built-in memory for energy savings come standard
• NEMA 1 Electrical
• Purge mufflers and power cord come standard

• TOC Analyzers
• Continuous Emissions Monitoring Systems
• Environmental Instruments
• FTIR Spectrometers
• Gas Chromatographs
• Laboratory Analyzers

• Brochure (PDF)